SM X15

LED SOLAR SIMULATOR IV CHARACTERIZATION SYSTEM SM-X15

HOUSING OF SOLAR SIMULATOR ARE DESIGNED ACCORDING TO REQUESTED REQUIREMENTS

System icludes (as in Image)

1. Led Solar simulator
2. Sample Holder
3. Reference cell
4. Software
5. Sourcemeter

TECHNICAL DATA AND CALIBRATION RESULTS
SPECTRAL MATCHING TO SUN

Solar Simulator
I-V Characterization System, Sourcemeter
Sample Holder
Connections

SOFTWAREs
Solar IV characterization Software
Solar Photo Transient Current Software

SPECIFICATIONS
·         Spectral Match: Class A (0.75–1.25, 400–1100 nm)
·         Spatial Uniformity: Class A (≤2%)
·         Temporal Instability: Class A (≤2% long-term, ≤0.5% short term)
·         Irradiance: 1200 W/m² (adjustable 500–1200 W/m²)
·         Wavelength Range: 400–1100 nm (upgradable to 350–1800 nm)
·         LED Lamp Type
·         Lamp Lifetime:  ≥10,000 hours
·         Beam Size: ≥ 100x100 mm (configurable)
·         Power Supply: 230 VAC, 50 Hz
·         Integrated with IV curve tracers for module performance testing.
·         User-friendly control software for irradiance adjustment, spectrum tuning, and data logging

·         Efficient internal cooling control (15 – 85 ° C)
·         Tabletop or rail-mountable with adjustable sample stage
·         Supplied with reference cell and calibration certificate traceable to international standards

Solar Physics Sourcemeter
Solarphys Tech
Voltage range: -20 V to +20 V
Voltage resolution: 0.001 V
Current range:  50 pA to 250 mA
Sample Holder
Connection probes: two probe connections
Probe IV Tester
Sample holder for solar cell
Movable probe tip

- Calibrated Reference solar cell to calibrate output to 1 SUN
Calibration procedure: (400-500nm, 500-600nm, 600-700nm, 700-800nm, 900-1100 nm which meets Class AAA specification for IEC 60904-9, JIS C 8912, and ASTM E 927-05 standards.

Software
I-V measurements
P-V measurements
lnI-V measurements
Isc-P (irradiance) measurements
Sample Holder
Integrated Software for Solar Simulator and Sourcemeter Control
Solar IV Characterization software
After the testing of samples, the results should be provided in a Tabulated format as well as plotted automatically.

Solar Cell I-V Characterization System
This system analyze all photovoltaic and photoconducting characteristics of all solar cells such Dye sensitized solar cells, Quantum dots solar cells, Organic solar Cells, Perovskite Solar Cells, Solar Silicon Solar cells, Thin films solar Cells under 1000 W/m2.
This system is a complete current-voltage (I-V) and power-voltage (P-V) measurement environment.

SOLAR SIMULATOR SYSTEM
•           Solar spectral spectrum is observed on the screen of the solar simulator controller when the measurement is performed.
•           The illumination area of the device is circular with a diameter of 100 mm

SOURCEMETER
•           The sourcemeter must have a sourcemeter. The sourcemeter have an automatic current range and the current range should be in the range  50pA-250 mA.
•           The voltage range of the sourcemeter is ranging from  -20 V to +20 V.
•           The intensity controller of solar simulator is 0- 1000 W/m2,0-1 SUN
•           The solar simulator measures the IV characteristics of all solar cells (Dye sensitized solar cell, perovskite Solar Cells, Quantum dots solar cells, Organic solar cell, Silicon solar cells) and be able to perform the IV characteristics of the batteries under computer control.
•           The solar simulator measures the current-voltage characteristics of the solar cell under 1 SUN
•           The current-voltage (I-V) characteristics of the solar cell are measured with the software in the system. The solar cell's open circuit voltage Voc, short circuit current Isc, filling factor FF, maximum current Imax, maximum power Pmax and efficiency η, series resistance Rs, shunt resistance Rp and characteristic resistance Rch should be measured automatically.
•           A reference solar cell should be given with the solar simulator.
•           The probe holder of the device should be measured in a way that the measurements of the solar cell

SPECIFICATIONS OF SOLAR SIMULATOR SYSTEM
The device comply with the ASTM E 927-05 for uniformity classification, temporal stability and spectral match
Light illumination intensity range is adjustable 1000 W / m2
Device is automatically measure;
a.         open circuit voltage (Voc)
b.         short circuit current (Isc)
c.         fill factor (FF)
d.         voltage at Pmax (Vmax)
e.         current at Pmax (Imax)
f.          maximum output power (Pmax)
g.         shunt resistance (Rsh)
h.         series resistance (Rs)
i.          solar cell characteristics resistance (Rch)
j.          photoresponse (RR)
k.         solar cell efficiency (n)